Part 3 — GED ® Science · Unit 5 — Matter and Chemical Change
Chapter 20 — Solutions, Concentration, and Solubility
GED® test targets: P.c.4, SP.3.b
Imagine reading a fictional kitchen label that gives grams of sugar per serving. A larger drink can contain more total sugar while having a lower sugar concentration. Same problem as commissary prices: the total and the amount per unit are different answers. Chemistry gives that distinction a formal name so you do not get your shit twisted by the bigger number.
A solution is a uniform mixture at the particle level. The solvent is the substance doing the dissolving; the solute is dissolved in it. In a simple saltwater example, water is the solvent and salt is the solute. A solution can contain more than one solute, and solutions are not limited to liquids.
Dissolved does not mean destroyed
When a substance dissolves, its particles disperse through the solvent. In many ionic substances, ions separate and become surrounded by solvent molecules. In other cases, molecules disperse while remaining molecules. The solute still contributes mass even when you cannot see individual particles.
A suspension contains particles that may settle out rather than remain uniformly dispersed at the molecular or ionic level. A clear appearance alone does not prove a sample is pure. A transparent solution can contain substantial dissolved material.
Concentration measures how much is present
Concentration compares the amount of solute with an amount of solution or solvent, according to the stated definition. If a problem defines concentration in grams per liter of solution, 12 g in 3 L gives 4 g/L. If it asks mass percent, use solute mass divided by total solution mass, then multiply by 100.
For 5 g of solute mixed with 95 g of solvent, total solution mass is 100 g and mass percent is 5/100 × 100 = 5%. Dividing by 95 would give solute-to-solvent ratio, not the requested solute fraction of the whole solution. Denominators are small print with big consequences.
Dilution decreases concentration by adding solvent without adding solute. If the solute amount remains 8 g while solution volume changes from 2 L to 4 L, concentration falls from 4 g/L to 2 g/L. The solute did not vanish; it occupies more solution volume.
Solubility is a limit under specified conditions
Solubility describes how much solute can dissolve in a given amount of solvent under stated conditions. A saturated solution is at that limit. An unsaturated solution can dissolve more of the solute under those conditions. Excess solid can remain undissolved even when the dissolved portion is uniformly mixed.
For many solid solutes, solubility increases with temperature, but this is not a universal rule. Gases often become less soluble in water as temperature rises, and gas solubility can increase with pressure. Use the supplied data instead of chanting “hotter dissolves more” at every substance like a magic spell.
Stirring and smaller particle size can increase the rate at which some solids dissolve. They do not necessarily increase the final equilibrium solubility at the same temperature. Rate asks how fast; solubility asks how much can remain dissolved. Those are different questions.
Read a solubility table
The table gives constructed solubility values for a hypothetical solid: grams that can dissolve in 100 g of water at each temperature.
| Temperature (°C) | Solubility (g per 100 g water) |
|---|---|
| 20 | 30 |
| 40 | 45 |
| 60 | 60 |
At 20°C, adding 40 g of this solid to 100 g of water allows at most 30 g to dissolve at equilibrium in the stated model. Ten grams remain undissolved. At 60°C, the same 40 g can all dissolve because it is below the 60-g limit.
If a saturated solution containing 60 g dissolved in 100 g of water at 60°C cools to 20°C and reaches equilibrium without losing water, only 30 g remain dissolved. The other 30 g can crystallize out. The total amount of solute remains 60 g; its distribution between dissolved and solid forms changes.
Worked concentration question
Question: A solution contains 6 g of solute in a final volume of 300 mL. What is its concentration in g/L? A. 0.02 g/L. B. 2 g/L. C. 20 g/L. D. 1,800 g/L.
Answer: C. Convert 300 mL to 0.300 L, then calculate 6 ÷ 0.300 = 20 g/L. A divides by 300 without converting the volume unit. D multiplies quantities that should be divided. A useful check is that one liter is a little more than three times 300 mL, so it would contain about three times 6 g at the same concentration.
Strong and concentrated are not always synonyms
In everyday language, a “strong solution” may mean concentrated. In acid-base chemistry, strong describes the extent of ionization in water, while concentrated describes the amount present. A dilute strong acid and a concentrated weak acid are different possibilities. Follow the passage’s definitions rather than importing casual language.
The pH scale describes acidity and basicity in aqueous systems. Near ordinary conditions, pH 7 is neutral, lower values are acidic, and higher values are basic. Each pH unit represents a tenfold difference in hydrogen-ion activity in the basic model; it is not a simple linear scale. A pH 3 solution is not merely “one unit more acidic” than pH 4 in a proportional sense.
Before you calculate, ask whether the question is about amount, rate, limit, or chemical behavior. Once you know that, the right calculation or explanation gets a lot less slippery.
How Much Is Dissolved, How Fast, and How Much Can Fit?
A solution is a homogeneous mixture at the molecular or ionic scale. The solvent is the medium doing the dissolving, and the solute is what is dissolved. Water can surround separated ions or interact with molecules, dispersing them throughout the solution. Dissolved does not mean destroyed. Salt ions do not become miniature pieces of water simply because you cannot see them.
Concentration expresses solute amount relative to a specified amount of solution or solvent. Read the definition carefully. Ten grams per 100 mL of solution is not automatically ten grams per 100 mL of added water. If a supplied solution contains 12 g in 200 mL, its concentration is 12/200 = 0.06 g/mL, or 6 g per 100 mL. The denominator describes the actual basis of comparison.
Dilution lowers concentration by increasing the solution amount without adding solute. If that 12 g is diluted to a final volume of 400 mL, concentration becomes 12/400 = 0.03 g/mL. The solute mass stayed 12 g. The often-supplied relationship C1V1 = C2V2 follows from conserving solute amount, not from a mysterious formula committee deciding to make your day worse.
Stirring and crushing can increase dissolving rate by renewing contact or increasing surface area. Solubility is the equilibrium amount that can dissolve under stated conditions. Stirring does not necessarily increase that limit. Temperature affects different substances differently; gases often become less soluble in warmer liquids, while many solids become more soluble. Use the supplied relationship instead of assuming “hotter dissolves more” is universal.
An unfamiliar passage may distinguish concentration from acidity. The pH scale is logarithmic: a one-unit decrease corresponds to about ten times greater hydrogen-ion activity in the introductory model. A change from pH 5 to pH 3 corresponds to about 100 times, not twice. These are paper calculations, never instructions for mixing cleaners or adjusting actual chemical solutions. Understand the model and leave the real chemical handling to authorized procedures.
Your Turn — Guided and Independent Practice — Practice Check S20
Guided: A solution contains 15 g of salt in 300 mL of solution. Calculate concentration in grams per 100 mL.
Guided answer: 15 g ÷ 300 mL = 0.05 g/mL. Multiply by 100 mL: 5 g per 100 mL. Keep the numerator and denominator attached to their units so the calculation does not wander off drunk.
Inside guided: One drink-mix packet is meant for 500 mL of water. You mix one packet into 1,000 mL. How does your drink compare with label strength? How many packets would 1,500 mL need?
Answer: Same amount of solute in twice the water, so the concentration is half the label strength. For 1,500 mL at label strength: 1,500 ÷ 500 = 3 packets. Same powder, twice the water—that’s why it tastes like sad colored water.
Independent: More solute remains undissolved after stirring at a fixed temperature. The solution is most likely A. pure water. B. saturated under those conditions. C. a new element. D. guaranteed to dissolve everything if stirred forever.
Independent answer: B. A saturated solution holds the maximum dissolved amount under stated conditions. A and C contradict the setup; D ignores solubility limits. Common mistake: confusing dissolving rate with the final amount that can dissolve.
Unit 5 Check (Science) — Inside, Mixed, and Unfamiliar Practice
Inside independent: A salt packet on a food tray contains sodium chloride, NaCl. Is salt an element, a compound, or a mixture? Name the elements in it. Then classify salt water in a cup.
Answer: Sodium chloride is a compound: the elements sodium and chlorine are bonded in a fixed ratio. Salt water is a mixture (a solution), because the amount of salt can vary and the water can be evaporated to leave the salt behind (Chapters 17 and 20).
Mixed: You dissolve 10 g of drink powder in 500 mL of water. What is the concentration in grams per liter? If the water has a mass of 500 g, what is the mass of the finished drink?
Answer: 500 mL = 0.5 L, so 10 ÷ 0.5 = 20 g/L. The mass is 500 + 10 = 510 g. Dissolving does not destroy the powder; mass is conserved (Chapters 19 and 20).
Unfamiliar (GED-style): An iron nail is left in an open dish of damp sand for a month. The rusted nail has more mass than it had at the start. Which explanation fits best? A. Oxygen from the air combined with the iron, adding mass to the solid. B. Matter was created as the nail rusted. C. The balance must be wrong, because rusting always lowers mass. D. Rusting is a physical change.
Answer: A. The iron reacted with oxygen from the air (the water helps) to form rust, a new solid, so the nail gained matter from outside it. B violates conservation of mass, C ignores matter entering the system, and D misses the new substance (Chapter 19).
Ready to move on: get all three right with your reasoning written out. If you miss one, go back to the chapter named in its answer. With three questions, our 80% study goal means all three, on your first try, without help.