Part 3 — GED ® Science · Unit 6 — Energy, Heat, Waves, Resources, and Electricity
Unit 6 — Energy, Heat, Waves, Resources, and Electricity
Inside-to-GED Bridge — Hot Trays, Ovens, Refrigeration, and Waves
A hot tray loses energy to cooler surroundings. An oven transfers energy by conduction, convection, and radiation. Refrigeration does not manufacture cold; it transfers thermal energy from one region to another using energy. Building temperature changes can involve insulation, air movement, sunlight, and heating or cooling systems.
Sound from a program callout needs a material medium. Light can cross empty space. A shiny surface can reflect more radiation, while a dark surface may absorb more under the tested conditions. These are mechanisms, not slogans.
GED questions may give a cooling table, wave diagram, or efficiency calculation. Read axes and units, identify the system boundary, and track where energy goes. “Lost” usually means transferred out of the chosen system, not destroyed.
Chapter 21 — Energy Changes Form and Keeps Its Accounts
GED® test targets: P.a.3, SP.7.b
A fictional laundry motor turns a drum, warms up, and makes noise. Calling the heat and sound “wasted energy” means they are not the desired output. It does not mean the energy vanished. A machine does not get to hide its losses like somebody leaving purchases off an account ledger. The scientific job is to follow every important transfer across a clearly defined boundary.
Energy is the capacity to produce change or do work. We recognize it through what systems can do: move, warm, deform, emit light, or drive chemical reactions. Energy can be transferred and transformed, but the total is conserved when the system and its surroundings are accounted for.
Name the form and the system
Kinetic energy is energy associated with motion. Potential energy is associated with position or configuration in a system. A raised object has gravitational potential energy relative to a chosen lower reference. A stretched elastic material can store elastic potential energy. Chemical energy is associated with the arrangements of atoms and electrons in substances.
Thermal energy concerns microscopic motions and interactions of particles. Electrical energy can be transferred through electric systems. Radiant energy is carried by electromagnetic radiation, including visible light. These categories help trace changes; energy is not a set of unrelated substances stored in separate invisible buckets.
A system boundary defines what is included in the analysis. If you study only a moving cart, friction can reduce its kinetic energy. Include the cart, track, and surroundings, and the energy transferred into thermal forms is part of the account. “The cart lost energy” can be correct for the cart without meaning energy was destroyed.
Trace a transformation chain
A battery-powered motor can transfer chemical energy into electrical energy, then into motion and thermal energy. A plant captures light energy in chemical forms; an animal consuming plant material can use chemical energy for movement and internal processes. In each case, some energy becomes dispersed as heat.

Simplified energy pathway. All outputs, including thermal energy, belong in the conservation account.
Useful output depends on the purpose. For a lamp, light may be the desired output and warming an unwanted side effect. For a heater, warming is the purpose. Calling an energy transfer “waste” does not mean it ceased to exist; it means it did not serve the chosen task.
Efficiency compares useful output with input
Efficiency = useful energy output ÷ total energy input × 100%. A device receiving 500 J and delivering 150 J as the intended mechanical output has efficiency 150/500 × 100 = 30%. The remaining 350 J go into other forms or transfers in the stated accounting.
A joule, abbreviated J, is a unit of energy. Power uses a different unit because it describes energy transfer per unit time. We will calculate power later. For now, do not swap energy and power merely because both sound like something a machine has.
| Teaching-model device | Input energy | Useful output | Other transfers |
|---|---|---|---|
| A | 400 J | 120 J | 280 J |
| B | 400 J | 200 J | 200 J |
| C | 800 J | 320 J | 480 J |
B has efficiency 50%, A 30%, and C 40%. C delivers the greatest useful energy amount but is not the most efficient. “Most output” and “largest useful fraction” ask different questions. This distinction keeps a lot of advertising bullshit from passing as physics.
Kinetic and gravitational energy models
For ordinary speeds, kinetic energy can be modeled as KE = ½mv², where m is mass in kilograms and v is speed in meters per second. A 2-kg object moving at 3 m/s has KE = ½ × 2 × 3² = 9 J. Square the speed before completing the multiplication.
If the same object’s speed doubles to 6 m/s, kinetic energy becomes 36 J, four times as much. Doubling mass at the same speed doubles kinetic energy. The squared speed term is why speed changes can have such large effects in collisions.
Near Earth’s surface, a change in gravitational potential energy can be modeled as ΔPE = mgh, where h is the height change and g is approximately 9.8 m/s². Using a supplied simplified g = 10 m/s², lifting 3 kg by 2 m increases potential energy by 3 × 10 × 2 = 60 J. The reference height matters; the change is what the calculation describes.
Worked energy-account question
Question: A model device receives 1,000 J and converts 250 J to useful movement. Which statement is correct? A. The remaining energy was destroyed. B. Its efficiency is 75%. C. Its efficiency is 25%, and 750 J are transferred in other ways. D. Its useful output exceeds its input.
Answer: C. Divide useful output by input: 250/1,000 = 0.25. B describes the other fraction, not the useful fraction. A violates conservation. D contradicts the given amounts.
A second question asks what evidence would challenge a claim of 110% efficiency for a device with no additional energy source. Careful measurements of every input and output would be needed, because the claim exceeds the accounted input. An apparent excess often points to a missed input, inconsistent units, or measurement error. A bold percentage does not get to repeal conservation.
Apply the model without overextending it
Energy calculations require stated assumptions. Ignoring friction may be appropriate in a simplified model but not in a real machine. If all 60 J of gravitational potential energy become kinetic energy, the result differs from a system that transfers 20 J into thermal energy along the way.
Name the starting form, ending forms, boundary, and omitted transfers. Then the equation becomes an explanation rather than a trick. This habit will connect heat, waves, ecosystems, and machines across the rest of the book.
Choose the Boundary Before You Count the Energy
The system is whatever you choose to study; the surroundings are everything outside it. For a motor-only system, electrical energy enters, and mechanical work, heat, and sound can leave. For a larger system including the laundry room, some of that heat remains inside the chosen boundary. An apparent disagreement can come from different boundaries rather than different physics. Define the damn system before arguing about the total.
Kinetic energy depends on mass and the square of speed: KE = ½mv². A 4-kg model cart moving 3 m/s has KE = ½ × 4 × 3² = 18 J. At 6 m/s it has 72 J. Doubling speed quadruples kinetic energy. Multiplying mass and speed once would calculate momentum, a different quantity with a different purpose. Familiar-looking formulas are not interchangeable.
Near Earth’s surface, a supplied gravitational-potential model is PE = mgh. Using g ≈ 10 m/s² for an explicitly rounded model, lifting 4 kg by 2 m adds 4 × 10 × 2 = 80 J. The choice of zero height is a reference, not a claim that energy is absent everywhere below it. Differences in height determine the energy change in this model.
If a device takes 800 J and supplies 500 J of useful output, useful efficiency is 500/800 × 100 = 62.5%. The remaining 300 J must be accounted for in other transfers or stored energy. Whether heating counts as useful depends on the task: it is the point of a heater but usually an unwanted consequence in a motor. Efficiency needs a purpose as well as a ratio.
An unfamiliar scientific passage may claim a device gives more energy than it receives. Check for missed inputs, changing stored energy, incompatible units, and measurement error before swallowing that bullshit. Conservation is tested across the whole account, not just the two numbers selected for the advertisement.
Your Turn — Guided and Independent Practice — Practice Check S21
Guided: A falling object loses 80 J of gravitational potential energy and gains 65 J of kinetic energy. Account for the remaining 15 J without claiming energy vanished.
Guided answer: The remaining energy can be transferred into thermal energy, sound, deformation, or air motion. Total energy is conserved, although useful mechanical energy can spread into less organized forms.
Inside guided: On a cold day, you rub your hands together and they warm up. Name the energy transformation.
Answer: Kinetic energy (motion) changes into thermal energy through friction. No energy is created; it changes form. Your hands didn’t make heat out of nothing. They turned motion into heat.
Independent: A machine receives 500 J and provides 350 J of useful output. What is efficiency? A. 70%. B. 143%. C. 850%. D. 0.7 J.
Independent answer: A. Efficiency = useful output ÷ input × 100 = 350/500 × 100 = 70%. B reverses the ratio (500 ÷ 350 ≈ 143%, impossible because useful output cannot exceed input), C adds values, and D gives the wrong unit. Common mistake: thinking inefficient means energy was destroyed.