Part 5 — GED ® Mathematical Reasoning · Unit 1 — Q.1 Apply number sense concepts, including ordering rational numbers, absolute value, multiples, factors, and exponents
Chapter 2 — Factors, Multiples, and Number Properties
GED® test targets: Q.1.b; MP.4.a
Inside start: You have 24 stamps and want to split them evenly into envelopes with none left over. Four envelopes work; five do not. The numbers that divide 24 evenly are its factors, and they decide which splits work.
What You’re Going to Learn
Find factors, prime factorizations, greatest common factors, and least common multiples; keep factors from getting confused with multiples; and use number properties without inventing some freestyle numerical bullshit.
Why This Shit Matters
Factors help you make the largest equal groups, simplify fractions, and factor algebraic expressions. Multiples help you find shared schedules and common denominators. Mix those bastards up and later lessons will charge interest on the confusion. Confuse the two and every later fraction problem shows up carrying the same unpaid bullshit.
Key Vocabulary
Factor: a whole number that divides another whole number with no remainder.
Multiple: a result of multiplying a number by a whole number.
Prime: a whole number greater than 1 with exactly two positive factors: 1 and itself.
Composite: a whole number greater than 1 with more than two positive factors.
GCF: greatest common factor.
LCM: least common multiple.
Factors Go In; Multiples Come Out
A factor divides a number with no remainder. For 24, factor pairs include 1 and 24, 2 and 12, 3 and 8, and 4 and 6. Every pair multiplies back to 24. If your supposed pair multiplies to 23 or 25, it is not “close enough.” This is mathematics, not horseshoes, darts, or some half-assed guessing contest.
A multiple is built by multiplying. Multiples of 6 are 6, 12, 18, 24, 30, and so on. Factors go into 24; multiples come out of repeated multiplication by 24 or another number. Keep those two directions straight before the vocabulary starts kicking your ass.
List Factor Pairs Without Missing Shit
For 24, start with 1 × 24. Then test 2, 3, 4, and so on. Write each successful pair once. Do not keep rewriting the same damn pair backward like the numbers changed identities:
1 × 24
2 × 12
3 × 8
4 × 6
The next pair, 6 × 4, repeats 4 × 6 backward, so stop before the list starts walking in circles like a confused jackass. The positive factors of 24 are 1, 2, 3, 4, 6, 8, 12, and 24.
An array shows the same truth without hiding behind symbols: 24 objects can form rectangles measuring 1 by 24, 2 by 12, 3 by 8, or 4 by 6. Same factors, different picture. The numbers did not magically change clothes or join a witness-protection program.
Prime Factorization: Break It Until Every Piece Is Prime
A prime factorization breaks a composite number into prime factors only. Keep splitting composite pieces until no composite bastard remains hiding under the couch pretending the job is finished. The final prime factors must multiply back to the original number; otherwise you did not factor it, you disassembled the poor son of a bitch and lost parts.
24 = 6 × 4
= (2 × 3)(2 × 2)
= 2 × 2 × 2 × 3
= 23 × 3
Both factor trees land on the same prime factors: 2 × 2 × 2 × 3. Write repeated factors with exponents: 24 = 23 × 3 (the small 3 means three 2s multiplied: 2 × 2 × 2). One is not prime and does not belong in the prime factorization, no matter how badly that attention-seeking little bastard wants in. No extra factors sneak in through the back door. No damn exceptions.
GCF: Largest Shared Factor
The greatest common factor is the largest factor shared by all the numbers. You can list factors or compare prime factorizations. Use the method that makes the shared factors obvious, not whatever random bullshit your panic grabs first.
Example: GCF of 18 and 24
18 = 2 × 32
24 = 23 × 3
Each number has one factor of 2 and at least one factor of 3 in common. Use only the smaller shared count of each prime: GCF = 2 × 3 = 6. Taking extra factors that are not shared is how you manufacture bullshit instead of a common factor.
GCF = 2 × 3 = 6
Six is the greatest number of identical packets you can make. Each packet gets 18 ÷ 6 = 3 pencils and 24 ÷ 6 = 4 sheets. Check the totals: 6 × 3 = 18 and 6 × 4 = 24. Nothing left loose, nothing invented, and no pencil magically crawling out from under the arithmetic.
LCM: Smallest Positive Shared Multiple
The least common multiple is the first positive number appearing in every multiple list. Use it when repeated schedules meet or fractions need a shared denominator. You are building up to a common total, not chopping down into equal groups. Pick the wrong job and the numbers will hand you a beautiful answer to the wrong damn question.
Example: LCM of 6 and 8
Multiples of 6: 6, 12, 18, 24, 30, ...
Multiples of 8: 8, 16, 24, 32, ...
(The dots mean each list keeps going.) The first shared value is 24, so LCM(6,8) = 24. Stop there. Least means the calculation does not keep marching to 48, 72, and 96 like some overachieving bastard that missed the damn assignment.
Prime factorization reaches the same answer for 6 and 8: use every prime required by either number at its larger count, so 23 × 3 = 24. The same rule handles a tougher pair. For 18 and 24, compare these factorizations:
18 = 2 × 32
24 = 23 × 3
LCM = 23 × 32 = 72
Do You Need GCF or LCM?
Use GCF when you are dividing quantities into the greatest number of identical groups. Use LCM when you are finding the first shared total, cycle, or denominator. Ask what the story is doing: splitting down or building up? The word both does not make that decision for you.
Fictional library tasks repeat every 12 and 18 minutes. The next shared repeat is the LCM, 36 minutes. The GCF is 6, but 6 minutes cannot be the next shared repeat because 6 is not even a multiple of 12 or 18. Test the answer against the story instead of worshiping the acronym.
Properties: Legal Ways to Rearrange the Work
Commutative Property
The commutative property says order can switch in addition or multiplication: 4 + 7 = 7 + 4 and 3 × 8 = 8 × 3. Subtraction and division do not get this privilege; 8 − 3 is not 3 − 8, and 12 ÷ 4 is not 4 ÷ 12.
Associative Property
The associative property says grouping can change in addition or multiplication: (2 × 5) × 3 = 2 × (5 × 3). Again, subtraction and division are not invited to this party. Regroup them carelessly and the value changes.
Distributive Property
The distributive property says multiplication reaches every term inside the group:
6(10 + 4) = 6×10 + 6×4 = 60 + 24 = 84
8(40 − 3) = 8×40 − 8×3 = 320 − 24 = 296
Do not distribute to only the first term and then wander off. Every term gets multiplied. Algebra will return to this rule again and again, so get the whole damn family served.
Watch How It Works
Example A — Identical Fictional Packets
Eighteen pencils and 24 sheets must be divided into identical packets with nothing left. The GCF is 6, so make 6 packets with 3 pencils and 4 sheets each. Check both supplies separately. A packet plan that checks only the pencils and quietly loses paper is some suspicious-ass bookkeeping.
Example B — Mental Rewrite
Compute 8 × 37 by writing 37 = 40 − 3. Then 8(40 − 3) = 320 − 24 = 296. Check another way: 8(30 + 7) = 240 + 56 = 296. Different routes, same answer. That agreement is your evidence that the shortcut was legal.
Common Mistakes and How to Avoid Them
These mistakes look small until they infect every later step, so shut them down here:
Calling 1 prime. Prime numbers are greater than 1 and have exactly two positive factors. One has only one positive factor—its own lonely ass.
Calling every shared-number problem an LCM problem. Ask whether the situation is forming equal groups or waiting for cycles to meet.
Stopping a prime factorization while a composite factor is still sitting there pretending the job is done.
Distributing to only the first term. Multiplication does not tap one term on the shoulder and ignore the rest of the damn group.
Lesson Summary
Factors divide; multiples are built. GCF finds the largest shared divisor, and LCM finds the smallest positive shared multiple. Number properties let you rearrange or rewrite calculations without changing value—as long as you follow the actual property and do not invent your own chaotic bullshit. Factors fit inside; multiples march outward. Nail that difference down before algebra starts swinging heavier tools.
If You Need Another Try
Write the factors of 12 and 18 in two lists. Circle the shared factors and box the greatest one. Then write multiples of 12 and 18 until the first shared multiple appears. Putting the lists side by side makes it harder for factor and multiple to swap name tags and start bullshit.
Your Turn — Practice
1. You have 12 stamps and 18 envelopes and want to sort them into identical packs with nothing left over, making as many packs as possible. How many packs, and what goes in each?
2. Find the least common multiple of 8 and 12.
3. Use the greatest common factor and the distributive property to rewrite 36 + 48.
Answer check: 1. GCF(12, 18) = 6, so 6 packs, each with 2 stamps and 3 envelopes. 2. 24. Multiples of 12: 12, 24; 24 is also a multiple of 8. 3. 12(3 + 4). Check: 12 × 7 = 84 = 36 + 48.
Wrong-answer roadmap: If you answered 36 for the first problem, you found a multiple (building up) when the story was splitting down. Reread “Factors Go In; Multiples Come Out.”