Part 5 — GED ® Mathematical Reasoning · Unit 2 — Q.2 Add, subtract, multiply, divide, and use exponents and roots of rational, fraction and decimal numbers
Unit 2 — Q.2 Add, subtract, multiply, divide, and use exponents and roots of rational, fraction and decimal numbers
Official indicators (GED Assessment Guide for Educators, October 2020, word for word): Q.2.a Perform addition, subtraction, multiplication, and division on rational numbers. Q.2.b Perform computations and write numerical expressions with squares and square roots of positive, rational numbers. Q.2.c Perform computations and write numerical expressions with cubes and cube roots of rational numbers. Q.2.d Determine when a numerical expression is undefined. Q.2.e Solve one-step or multi-step arithmetic, real world problems involving the four operations with rational numbers, including those involving scientific notation.
Chapter 8 — Operations with Whole Numbers
GED® test targets: Q.2.a (foundation skills, below GED level); MP.4.a
Inside start: A commissary receipt adds up items, multiplies a price by a quantity, and subtracts the total from your balance. You already check receipts like that in your head; this chapter writes those steps down so they work every time. (Prices and rules vary by facility; every number here is made up.)
What You’re Going to Learn
Add, subtract, multiply, and divide whole numbers; interpret remainders instead of dumping them at the edge of the page; use traditional algorithms and conceptual alternatives; and check answers with inverse operations and estimation. In other words, do the damn work and make the work prove itself before it gets to leave the table.
Why This Shit Matters
A supply inventory, a weekly schedule, a work tally, and a budget can use the same numbers while requiring completely different operations. Choosing the operation is part of the mathematics. Perfect arithmetic attached to the wrong relationship is still bullshit with clean handwriting.
Key Vocabulary
Sum: the result of addition.
Difference: the result of subtraction.
Product: the result of multiplication.
Quotient: the result of division.
Remainder: the amount left after forming equal whole groups.
Inverse operations: operations that undo each other.
Addition: Combine Like Units
Addition combines quantities measured in the same unit. Line the damn numbers up: ones under ones, tens under tens, hundreds under hundreds. If a column contains ten or more, regroup ten of that unit as one of the next larger unit. Carrying isn’t a magic trick; it is a fair place-value exchange.
Traditional Written Addition: 365 + 178
1 1
3 6 5
+ 1 7 8
-------
5 4 3
Ones first: 5 + 8 = 13. Write the 3 in the ones place and carry the extra ten where it belongs. Tens: 6 + 7 + 1 = 14 tens. Write 4 tens and carry 1 hundred. Hundreds: 3 + 1 + 1 = 5 hundreds. The sum is 543. Do not cram 13 into one column and hope the rest of the number politely ignores that pile of crap.
Place-value route: tear 365 into 300 + 60 + 5 and 178 into 100 + 70 + 8. Combine matching units to get 400 + 130 + 13, then regroup to 500 + 40 + 3 = 543. Same answer, but this route shows exactly where the carried tens and hundreds came from instead of treating them like mysterious little hitchhiking bastards.
Subtraction: Remove, Compare, or Find Change
Subtraction may find what remains, how much changed, or the difference between quantities. When the top digit is too small, trade one unit from the next place for ten of the current unit. “Borrowing” is really exchanging; you are trading one ten for ten ones, not losing a damn thing. The total value stays the same while its place-value form changes.
Traditional Written Subtraction: 543 − 286
Original: 5 hundreds 4 tens 3 ones
Exchange 1 ten: 5 hundreds 3 tens 13 ones
Exchange 1 hundred:4 hundreds 13 tens 13 ones
4 13 13
- 2 8 6
-----------
2 5 7
Work the renamed places: 13 − 6 = 7 ones, 13 − 8 = 5 tens, and 4 − 2 = 2 hundreds. The difference is 257. Now make the answer testify: 257 + 286 = 543. If the original number does not come back, something got screwed up. Find the first column where your work split from the correct structure.
Place-value route: rename 543 as 400 + 130 + 13, then subtract 200 + 80 + 6. You get 200 + 50 + 7 = 257. The traditional cross-outs are not random scratches made during an arithmetic breakdown; they are a compressed record of these exact exchanges.
Multiplication: Equal Groups and Place-Value Products
Multiplication records equal groups or scaling. Six bundles with eight towels each means 6 × 8 = 48 towels. When the multiplier has several digits, break it into place values or use the traditional partial-product algorithm. Either way, every place gets multiplied; no digit gets to hide in the bathroom until the work is over.
Traditional Vertical Multiplication: 24 × 13
2 4
× 1 3
-----
7 2 ← 24 × 3
2 4 0 ← 24 × 10
-----
3 1 2
The second partial product is 240, not 24, because the 1 in 13 means one ten. The placeholder zero holds that product in the tens place. Forget it and you have not made a cute pencil slip; you chopped a zero off 240, made the value ten times too small, and sent the answer staggering into traffic with its pants around its ankles.
Area or partial-products method: (20 + 4)(10 + 3) creates four products: 200 + 60 + 40 + 12 = 312. The standard vertical algorithm compresses those same four products into two rows. Different outfit, same mathematical body, same damn answer.
Long Division: Divide, Multiply, Subtract, Bring Down
Long division is where people start throwing quotient digits wherever the hell they feel like. Do not. Quotient-place alignment matters. Each quotient digit sits above the place of the dividend it describes.
Traditional Long Division: 468 ÷ 12
3 9
-----
12 ) 4 6 8
3 6 ← 3 × 12
---
1 0 8 ← subtract, then bring down 8
1 0 8 ← 9 × 12
-----
0
Twelve cannot form a whole group from 4 hundreds alone, so begin with 46 tens. Three groups fit because 3 × 12 = 36; four groups would be 48, which is too damn many. Write 3 above the 6, in the tens place of the quotient. Subtract 46 − 36 = 10 tens, bring down the 8 ones, and make 108 ones. Twelve fits 9 times. Write 9 in the ones place, multiply 9 × 12 = 108, subtract, and finish at 0. The quotient is 39, with every digit sitting where it belongs.
Do not admire a quotient and wander off. Make that bastard prove itself with divisor × quotient + remainder = dividend:
12 × 39 + 0 = 468
Partial-quotients method: rip out 30 groups because 12 × 30 = 360, leaving 108. Rip out 9 more because 12 × 9 = 108. Add the groups: 30 + 9 = 39. The traditional algorithm and partial quotients took different roads and arrived at the same damn address.
Zeros Inside the Quotient: 624 ÷ 6 = 104
1 0 4
-------
6 ) 6 2 4
6
-
2 ← 6 fits into 2 tens zero times
0 ← write 0 in the tens place
--
2 4
2 4
---
0
Six fits into 6 hundreds once. Bring down the 2 tens. Six fits into 2 tens exactly zero times, so write the zero in the quotient before bringing down the 4 ones. Then 6 fits into 24 four times. Writing 14 instead of 104 claims 6 × 14 = 84 somehow equals 624, which is not a small mistake—it is a six-car arithmetic pileup with the quotient zero missing from the scene. Put that zero back. It is guarding the damn tens place.
Remainders: 50 ÷ 8
6 R2
------
8 ) 5 0
4 8
---
2
Eight fits into 50 six whole times, leaving 2. Check: 8 × 6 + 2 = 50. A valid remainder must be smaller than the divisor. If you announce remainder 10 after dividing by 8, you are not finished—another full group of 8 is sitting there waving and asking what the hell you are doing.
A Remainder Needs a Meaning
Suppose 50 people need vehicles seating 8 each. The calculation gives 6 remainder 2, but six vehicles strand two people, so the situation requires seven vehicles. If 50 items are packed only into full boxes of 8, the same calculation means six full boxes and two loose items. Same arithmetic, different conclusion. Read the damn question before you round a human being into the parking lot.
Watch How It Works
Example A — Fictional Paper Inventory
A class starts with 365 sheets and receives 178, so the total is 543 sheets. Then 286 sheets are used: 543 − 286 = 257 sheets. Check by adding 257 + 286 and getting 543 back. If the check returns some other number, do not blame the paper—the arithmetic wandered off and needs to be dragged back by the first wrong column.
Example B — Mixed Session Lengths
There are 7 sessions of 45 minutes and 3 sessions of 30 minutes. Multiplying 10 × 45 would pretend every session lasts forty-five minutes, which is made-up bullshit. Keep the groups separate: 7 × 45 = 315 and 3 × 30 = 90. Add to get 405 minutes. Divide by 60: 6 remainder 45, so the total is 6 hours 45 minutes. The remainder is 45 minutes, not 0.45 hour. Units do not magically change because division happened.
Common Mistakes and How to Avoid Them
Choosing an operation from one keyword. “Each” and “more” can help, but they are not your damn boss. Identify the quantities, the relationship, and the question before touching the arithmetic.
Misaligning places in addition or subtraction. Stack ones under ones and tens under tens. If the columns look drunk, straighten the bastards before calculating.
Forgetting the tens-place zero in multi-digit multiplication. That zero is holding a place, not taking a smoke break. Remove it and the entire partial product slides into the wrong damn column.
Putting a long-division quotient digit above the wrong place. Each digit belongs above the dividend place it measures. Toss it somewhere else and the quotient is screwed before the next subtraction even begins.
Skipping a zero inside a quotient. If the divisor fits zero times in a place, write the damn zero before bringing down the next digit.
Accepting a remainder equal to or larger than the divisor. That means another full group still exists, so finish the division instead of clocking out early and leaving half the work on the table.
Rounding down when another whole container, seat, trip, or package is required. A remainder may look small on paper while still representing an actual person with no seat. Context does not give a shit that the decimal was close.
Lesson Summary
Addition combines, subtraction removes or compares, multiplication scales equal groups, and division finds group size or group count. Traditional algorithms work because of place value. Inverse checks, estimates, units, and remainder interpretation keep correct-looking bullshit from sneaking through.
If You Need Another Try
For regrouping, spread the number into hundreds, tens, and ones before compressing it into the written algorithm. For division, say the cycle aloud: divide, multiply, subtract, bring down. Put each quotient digit above the place it represents, then check divisor × quotient + remainder. If the check fails, chase the first bad step instead of doing the whole damn problem blindly again.
Your Turn — Practice
1. From a $25 balance, you buy 3 bags of coffee at $4 each and 6 soups at $1 each. How much is left?
2. Subtract: 4,005 − 1,268.
3. Divide: 1,344 ÷ 16.
Answer check: 1. 25 − 12 − 6 = $7. 2. 2,737. Regroup across the zeros. 3. 84. Check: 16 × 84 = 1,344.
Wrong-answer roadmap: If you got 3,263 for the subtraction, you subtracted the smaller digit from the larger in each place instead of regrouping. Reread “Subtraction: Remove, Compare, or Find Change.”