Part 5 — GED ® Mathematical Reasoning · Unit 2 — Q.2 Add, subtract, multiply, divide, and use exponents and roots of rational, fraction and decimal numbers
Chapter 11 — Operations with Fractions and Decimals
GED® test targets: Q.2.a; MP.4.a
Inside start: A drink-mix packet says to use 3/4 cup of water, and you only want half a packet. A soup costs $1.15 and you want 3 of them. Fractions and decimals show up in everyday math all the time.
Man, What Are You Doing Adding the Bottom Numbers?
What You’re Going to Learn
You’re going to perform all four operations with fractions and decimals, including signed values, and interpret the results in multistep situations. The signs still matter. The units still matter. Neither one gets to disappear just because the fractions look like a pain in the ass.
Why This Matters
Recipes, measurements, money, rates, and algebra don’t politely stay whole numbers to make the page easier. A calculator can multiply whatever bullshit you enter. It cannot decide whether your setup describes the situation. That part still belongs to you.
Key Vocabulary
Common denominator: a shared fractional unit. Reciprocal: a nonzero fraction with numerator and denominator exchanged. Decimal alignment: matching place values for addition and subtraction. Scaling: multiplying every amount by a common factor.
Adding and Subtracting Fractions
Before you add fractions, make them name the same-sized units. For 1/2 + 1/3, the least common denominator is 6. Rewrite 1/2 = 3/6 and 1/3 = 2/6, then add 3/6 + 2/6 = 5/6. You do not add the damn denominators. They name the size of the pieces; they aren’t another total waiting to happen. Halves plus thirds do not become fifths any more than two boots plus three spoons become five boot-spoons.
Subtraction follows the same damn structure. For 5/6 − 1/4, use twelfths: 10/12 − 3/12 = 7/12. Keep the denominator because it names the unit you’re counting. Get the units to match, combine the numerators, and then simplify. Don’t scramble the order and make the fraction clean up your mess.
You can convert mixed numbers to improper fractions first and keep the work in one form. For 3 1/4 − 1 3/4, write 13/4 − 7/4 = 6/4 = 3/2 = 1 1/2. Traditional regrouping works too: 3 1/4 becomes 2 5/4, then 2 5/4 − 1 3/4 = 1 2/4 = 1 1/2. Same mathematics, different paperwork. Pick a route and follow it; don’t switch halfway through and leave half a damn whole unaccounted for.
Multiplying Fractions
Multiply the numerators and multiply the denominators: (2/3)(3/4) = 6/12 = 1/2. Here’s what that means: two thirds of three fourths covers six of twelve equal small regions. You can cancel common factors across a numerator and denominator before multiplying when that helps, because those factors form a value of 1. It isn’t a disappearing-number trick. There’s a mathematical reason the bastards cancel.
Dividing Fractions
Division asks how many groups of the divisor fit in the dividend. For 3/4 ÷ 1/8, rename 3/4 as 6/8: six one-eighth groups fit. The reciprocal algorithm records the same fact: (3/4)(8/1) = 6. Invert the divisor, not the dividend. Not whichever fraction you damn well feel like flipping. The divisor. And never divide by zero.
Make fraction division prove itself: multiply the quotient by the original divisor. If 3/4 ÷ 1/8 = 6, then 6 × 1/8 = 6/8 = 3/4. You got the dividend back. That check drags a sneaky reciprocal error into daylight before the little bastard ruins the next step.
Decimal Addition and Subtraction
Line up the decimal points so matching places combine. Write 3.7 + 0.46 as 3.70 + 0.46 = 4.16. Tenths meet tenths. Hundredths meet hundredths. That’s why the points align—not because somebody wanted the page to look tidy. Line up the last digits instead and the decimal point ends up three counties away while the answer turns to shit.
Decimal Multiplication
Estimate first so the decimal point can’t bullshit its way past you. For 2.4 × 0.35, expect a number below 2.4 because 0.35 is below 1. Multiply 24 × 35 = 840. The factors contain three decimal places altogether, so the product is 0.840 = 0.84. Fraction form shows why: (24/10)(35/100) = 840/1000. The decimal placement follows the scale. It isn’t a guess dressed up as a rule.
Decimal Division
Make the divisor whole by multiplying both the dividend and divisor by the same power of ten. Both, dammit. Thus 4.8 ÷ 0.6 = 48 ÷ 6 = 8. Move only one decimal and you’ve changed the problem. That’s no shortcut. Check 8 × 0.6 = 4.8.
Signed Values and Multistep Work
Signed-number rules are still on duty. Rewrite subtraction as addition of the opposite when that helps. Follow order of operations, carry the units, and round at the end unless the situation explicitly rounds each separate transaction. Dividing by a positive number below 1 can increase the numerical result because more small groups fit. That isn’t the answer losing its shit; it’s division doing exactly what it’s supposed to do.
Watch How It Works
Example A — Recipe scaling. A batch uses 2 1/2 cups. For 3/5 of a batch, convert 2 1/2 = 5/2, then (5/2)(3/5) = 15/10 = 3/2 = 1 1/2 cups. Check with decimals: 2.5 × 0.6 = 1.5. Same quantity by both routes. The fraction and decimal aren’t arguing; they’re confirming the damn result.
Example B — Account model. Start with $18.75, add $12.50, and subtract three $2.35 items. Handle the repeated cost first: 3 × 2.35 = 7.05. Then 18.75 + 12.50 − 7.05 = 31.25 − 7.05 = $24.20. Estimate 19 + 13 − 7 ≈ 25, so $24.20 is believable. The estimate checks the size; it doesn’t replace the actual damn balance.
Example C — Signed fraction expression. Evaluate (−3/4 + 1/2) ÷ (−1/8). Get the grouped sum into fourths first: −3/4 + 2/4 = −1/4. Now multiply by the reciprocal: (−1/4)(−8/1) = 8/4 = 2. Check 2(−1/8) = −1/4. The signs and the reciprocal both have jobs here. Neither gets to haul ass halfway through the calculation.
Multiple Pathways, Same Mathematics
Fraction strips show why common denominators are required and why 3/4 contains six eighths. Traditional algorithms compress that reasoning into fewer steps. Decimal place-value charts show why alignment works; fraction forms show why decimal multiplication and division preserve scale. Learn the compact method, but keep the meaning close. A shortcut is useful only if you can tell when it’s producing bullshit.
Common Mistakes and How to Avoid Them
Don’t cross-multiply to add fractions. Don’t invert the dividend. Don’t align decimal points for multiplication as if you were adding. Different operations have different procedures; they aren’t interchangeable just because the same numbers showed up. Estimate the size before you accept a decimal location, or the little bastard can slide into the wrong place unnoticed.
Lesson Summary
Add and subtract fractions using shared units. Multiply across. Divide by a nonzero reciprocal. Align decimals for sums and differences, and preserve scale in multiplication and division. If the result’s size is ridiculous, don’t salute the bullshit and move on—check the setup. Common denominators for fractions, aligned places for decimal addition and subtraction, and a reasonableness check on the whole damn job.
If You Need Another Try
Model 3/4 ÷ 1/8 on a strip divided into eighths. Count six groups, then connect that count to multiplying by 8. For decimals, write place-value labels above every column before calculating. If the notation is hiding what’s happening, make the damn units visible. That’s another route to the same mathematics, not a different lesson.
Your Turn — Practice
1. You have 3/4 cup of drink mix, and each pitcher needs 1/8 cup. How many pitchers can you make?
2. Add 2 1/3 + 1 3/4.
3. Divide 4.8 ÷ 0.06.
Answer check: 1. 3/4 ÷ 1/8 = 3/4 × 8 = 6 pitchers. 2. 2 4/12 + 1 9/12 = 3 13/12 = 4 1/12. 3. Multiply both by 100: 480 ÷ 6 = 80.
Wrong-answer roadmap: If you got 0.8 for problem 3, you moved the decimal in only one number. Move it the same number of places in both. Reread “Decimal Division.”