Part 5 — GED ® Mathematical Reasoning · Unit 5 — Q.5 Calculate dimensions, surface area, and volume of three-dimensional figures
Unit 5 — Q.5 Calculate dimensions, surface area, and volume of three-dimensional figures
Official indicators (GED Assessment Guide for Educators, October 2020, word for word): Q.5.a When given geometric formulas, compute volume and surface area of rectangular prisms. Solve for side lengths or height, when given volume or surface area. Q.5.b When given geometric formulas, compute volume and surface area of cylinders. Solve for height, radius, or diameter when given volume or surface area. Q.5.c When given geometric formulas, compute volume and surface area of right prisms. Solve for side lengths or height, when given volume or surface area. Q.5.d When given geometric formulas, compute volume and surface area of right pyramids and cones. Solve for side lengths, height, radius, or diameter when given volume or surface area. Q.5.e When given geometric formulas, compute volume and surface area of spheres. Solve for radius or diameter when given the surface area. Q.5.f Compute surface area and volume of composite 3-D geometric figures, given geometric formulas as needed.
Chapter 21 — Volume, Surface Area, and Missing Dimensions of Prisms and Cylinders
GED® test targets: Q.5.a, Q.5.b, Q.5.c; MP.2.b
Inside start: A property box holds a certain amount of stuff and is made from a certain amount of cardboard. The first is volume and the second is surface area: same box, two different measurements. (Prices and rules vary by facility; every number here is made up.)
What You’re Going to Learn
You’re going to calculate and reverse volume and surface-area formulas for rectangular prisms, other right prisms, and cylinders. Filling a solid and covering it are different jobs. We’re keeping them separate so the formulas don’t turn into a half-assed parts swap.
Why This Shit Matters
Capacity and exterior covering measure different things. Storage and construction models require both, along with careful interpretation of which surfaces are included. Volume fills a solid and surface area wraps it; confusing them orders enough paint to fill the tank or enough liquid to wallpaper it. That shit answers the wrong question. Identify the measurement before calculating.
Key Vocabulary
Volume: space within a solid, measured in cubic units.
Surface area: total area of exposed faces, measured in square units.
Prism: a solid with parallel congruent bases connected by side faces.
Cylinder: a solid with circular parallel congruent bases.
Base area B: area of one base.
Base perimeter p: boundary length of that base.
Let’s Learn the Damn Mathematics
Prisms Stack a Base through a Height
For any right prism, V = Bh, where B is base area and h is the perpendicular distance between bases. A rectangular prism has V = lwh and surface area 2lw + 2lh + 2wh. A cylinder has V = πr2h and total surface area 2πr2 + 2πrh. B means the whole base area, not whichever base length you happened to grab first, dammit. Identify the parts before feeding numbers into the formula.
Watch How This Shit Works
A rectangular prism 8 cm by 5 cm by 3 cm has volume 120 cm3 and surface area 158 cm2. A cylinder with r = 4 ft and h = 6 ft has volume 96π ft3 and total surface area 80π ft2. Keep the units attached: cubic units fill the solids, square units cover their surfaces. Don’t make one answer wear the other answer’s damn label.
Solve Backward
If a cylinder has volume 200π and height 8, then 8πr2 = 200π, so r2 = 25 and r = 5. Substitute the recovered dimension into the original formula. Solving backward isn’t enough; make the answer rebuild the damn volume before you accept it.
Missing Dimensions, Open Boxes, and Unfolded Cylinders
A fictional training program compares a closed rectangular storage box with an open-topped bin of the same dimensions. Both hold the same volume, but the open bin has one fewer surface to cover. The formula must match the object and the requested measurement, not just the name box. A cubic answer belongs to volume. A square answer belongs to covering. Make the unit match the damn question. A box doesn’t grow a lid, for crying out loud, just because the memorized formula included one.
Volume counts cubic units; surface area counts square units. Mixing them is like measuring a gallon jug in inches. A right prism stacks identical base layers. If base area is B and perpendicular height is h, volume V = Bh. For a rectangular prism, B = lw, so V = lwh. Surface area of a closed rectangular prism is SA = 2lw + 2lh + 2wh because each face has a matching opposite face. For any right prism, lateral faces unfold into rectangles whose combined width is the base perimeter p, so SA = ph + 2B. Lateral area alone is ph. Count exposed faces before adding them. An open top is not an invisible lid you still have to paint. Leave the absent bastard out of the surface-area total.
A cylinder stacks circular layers: V = πr2h. Its curved side unfolds to a rectangle with width equal to circumference 2πr and height h. Thus closed-cylinder surface area is SA = 2πrh + 2πr2. One open end removes one πr2 term. Radius is half the diameter. Perpendicular height is not a diagonal distance across the object. Those measurements aren’t interchangeable spare parts. Plug in the wrong damn one and a perfectly followed formula still produces the wrong result.
Picture the measurements before selecting a formula. For a can with radius 3 cm and height 8 cm, πr2h uses the circular base area times the number of height layers. The term 2πrh comes from unrolling the curved side into a rectangle whose width is the circumference 2πr. These meanings explain the formulas and help prevent mixing square and cubic units. The letters aren’t academic bullshit for its own sake; each term measures a specific part of the solid.
To recover a height from volume, use h = V/B. For a cylinder, h = V/(πr2), and r = √[V/(πh)] when V and h are known. From a closed cylinder’s surface area with known radius, h = (SA − 2πr2)/(2πr). From a rectangular prism’s surface area with l and w known, h = (SA − 2lw)/[2(l + w)]. Positive lengths and a positive remaining lateral area are necessary. Substitute back into the original formula to check. Make the recovered dimension rebuild the original quantity. A neat-looking answer doesn’t get to skip that damn check.
Watch How It Works
Example A — Rectangular box. A closed box is 4 ft long, 3 ft wide, and 2 ft high. V = 4 × 3 × 2 = 24 ft3. SA = 2(12) + 2(8) + 2(6) = 24 + 16 + 12 = 52 ft2. An open top removes the 12-ft2 top, giving 40 ft2. If volume 24 ft3 and base 12 ft2 were given instead, h = 24/12 = 2 ft. The unit and the stated dimensions have to do their own damn jobs; familiarity with a formula isn’t permission to swap them.
Watch out: Radius is half the diameter, and squaring the wrong one makes a fourfold mess.
Example B — Cylinder dimensions. A closed cylinder has radius 3 cm and surface area 66π cm2. Set 66π = 2π(3)h + 2π(32). Divide by π: 66 = 6h + 18. Subtract 18 and divide by 6: h = 8 cm. Volume is π(9)(8) = 72π cm3. Check surface area 48π + 18π = 66π cm2. If volume were 72π and height 8, r = √(72π/8π) = 3 cm, diameter 6 cm. The original surface area comes back, and radius stays distinct from diameter. The bastards don’t share a name just because they belong to the same circle.
Where People Get This Shit Wrong
Don’t confuse surface area with volume, radius with diameter, or base area B with one base length. Square units cover; cubic units fill. Those distinctions aren’t fussy academic bullshit. They decide what the formula is actually measuring.
What You Need to Remember
Find the base area first, use perpendicular height, keep π exact when useful, and label square or cubic units correctly. The formula gets easier to follow when every piece has a job. Don’t let an unlabeled number sneak into the damn calculation and impersonate a dimension.
Your Turn — Practice
1. A property box is 24 in by 16 in by 12 in. Find its volume and its total surface area (closed lid).
2. A cylinder has radius 3 cm and height 10 cm. Find its volume in terms of π and to the nearest tenth.
3. A rectangular prism has a volume of 360 cm3 and a base of 8 cm by 9 cm. Find its height.
Answer check: 1. V = 24 × 16 × 12 = 4,608 in3. SA = 2(384 + 288 + 192) = 1,728 in2. 2. V = π(9)(10) = 90π ≈ 282.7 cm3. 3. 360 ÷ 72 = 5 cm.
Wrong-answer roadmap: If you got 30π for problem 2, you used r instead of r2. Square the radius first. Reread Example B.