Part 5 — GED ® Mathematical Reasoning · Unit 16 — Test Readiness (no content code)
Chapter 47 — Cross-Topic Review: Integrated Multistep Problem Solving
GED® test targets: Mixed review; MP.1, MP.3, MP.5
Inside start: Planning what to buy with a fixed amount means combining rates, percents, and limits in one plan. This chapter puts the tools together.
What You’re Going to Learn
You’re going to plan and explain multistep solutions combining rates, percent, geometry, equations, functions, and data; identify missing information; and correct flawed reasoning. This is where the tools work together. No chapter label is going to whisper which damn formula to grab, so build the route from the question.
Why This Shit Matters
Later GED work asks you to select tools rather than follow one chapter label. A complete solution shows why the method matches the evidence. Integrated problems connect quantities in a chain; skip one unit and the final dollar amount arrives carrying somebody else’s bullshit. Explain how each step creates what the next step needs instead of jumping from given numbers to a hopeful total.
Key Vocabulary
Solution pathway: a planned sequence connecting given information to the required answer.
Relevant information: data needed for the question.
Sufficient information: enough facts to determine the requested result.
Assumption: a condition taken as true without being established by the supplied facts.
Verification: checking a claim against appropriate evidence.
Let’s Learn the Damn Mathematics
Build the solution chain one labeled unit at a time instead of cannonballing from dimensions to dollars. A fictional community workshop needs floor covering, compares purchase options, and has a spending limit. That one situation can require area, unit cost, percent tax, and an inequality. Start with the required answer rather than rushing to use every number printed in the description. The numbers aren’t all demanding immediate damn attention. Give them jobs before calculating.
Each intermediate quantity must feed the next step and carry a compatible unit. Read the task and identify the unknown with its unit. Organize given information in a labeled list, table, or sketch. Choose a first step that creates a quantity needed later. Record each intermediate result with its unit. Decide whether the situation is additive, multiplicative, proportional, linear, quadratic, geometric, or probabilistic. More than one may apply, but each step should have a stated reason. Whole packages and fractional area are different constraints. Round the package count at the right step. Don’t make the next calculation swallow a quantity with the wrong damn unit and hope it digests the mistake.
Check the reasoning’s setup before checking its arithmetic. Was the original base used for percent change? Was the diameter mistaken for radius? Did the equation preserve a fixed fee only once? Did a graph’s scale change the apparent rate? Find the first unsupported step and repair it. A numerical answer can accidentally be correct despite invalid reasoning, so a sound explanation matters. A lucky result doesn’t turn a bullshit method into valid mathematics.
Identify missing information and call the problem underdetermined when that is what the evidence says. A rectangle’s perimeter alone does not determine its area: sides 4 and 6 give perimeter 20 and area 24, while sides 3 and 7 give the same perimeter and area 21. These counterexamples show exactly why an additional dimension or relationship is necessary. State what would resolve the uncertainty rather than inventing a value. An honest “not enough information” beats a beautifully calculated pile of made-up shit.
Watch How It Works
Example A — Integrated purchase. A fictional rectangular garden bed is 12 ft by 9 ft. Covering costs $2.50 per square foot with 10% extra material required and a fictional 6% tax on all material cost. Area = 108 ft2. Material quantity = 108 × 1.10 = 118.8 ft2, assuming fractional purchasing is permitted. Cost before tax = 118.8 × 2.50 = $297. Tax = 297 × 0.06 = $17.82. Total = $314.82. If material is instead sold only in 20-ft2 packages, six packages cover 120 ft2; the cost calculation must use the actual package pricing and tax basis provided. A correct chain preserves units as well as numbers. The purchase condition matters. Don’t spend money on a fractional package the stated model won’t damn well let you buy.
Example B — Model and threshold. A fictional savings model starts at $75 and adds $25 weekly. Cost of a planned purchase is $240 plus a stated $15 fee. Need 75 + 25w ≥ 255. Then 25w ≥ 180 and w ≥ 7.2. With whole weekly deposits, use 8 weeks. Seven weeks gives $250, insufficient by $5; eight gives $275, leaving $20. The modeled result is conditional on the stated deposits and costs. Seven weeks doesn’t work just because it is close. The five-dollar shortage still exists, dammit, so check the actual threshold before accepting the rounded answer.
Common Mistakes and How to Avoid Them
Applying a percent to the wrong amount. In a purchase with extra material and tax, apply each percent to the right base, in order.
Answering a different question. If the question asks for weeks, a dollar amount is not the answer.
Lesson Summary
Read the question, list what is given and what is missing, plan the steps, carry the units through each one, and check the final answer against the original question and an estimate.
Your Turn — Practice
1. A fictional commissary order has 4 items at $2.25 each and 2 items at $3.50 each, with a fictional 5% tax on the whole order. What is the total?
2. A garden bed is 10 ft by 6 ft. Soil comes in bags that each cover 8 ft2. How many bags are needed?
3. A worker earned $520 last month and $598 this month. What is the percent increase?
Answer check: 1. 4 × 2.25 = $9.00 and 2 × 3.50 = $7.00, so $16.00 before tax. Tax = 16.00 × 0.05 = $0.80. Total = $16.80. 2. 10 × 6 = 60 ft2, and 60 ÷ 8 = 7.5, so buy 8 bags (7 bags cover only 56 ft2). 3. Change = 598 − 520 = 78, and 78 ÷ 520 = 0.15 = 15%.
Wrong-answer roadmap: If you answered 7.5 bags for problem 2, round up: bags come whole, and 7 bags leave 4 ft2 uncovered. If you got about 13% for problem 3, you divided by the new amount; percent change uses the original amount. Reread Example A; for percent change, see Chapter 14.
Part 5 Final Check — Mixed GED®-Style Mathematical Reasoning
This original check follows the real test’s order: Part I without a calculator, then Part II with a calculator. Every setting here is new on purpose. About 45% of the items are quantitative and 55% algebraic, like the real test.
Part I — No Calculator
1. Add 3/4 + 2/3.
2. Evaluate 3a2 − b when a = −2 and b = 5.
3. Simplify 2(4x − 3) − (x + 5).
4. Evaluate (−2)3 + |−7|.
5. Which expression is undefined? A. 4/(2 − 2) B. (2 − 2)/4 C. 0 × 4 D. 4 − 4
Part II — Calculator Allowed
6. A 2.5-lb bag of rice costs $6.40. What is the price per pound?
7. $1,200 earns 3.5% simple interest per year for 2 years. How much interest is earned?
8. A store marks up a $15 shirt by 40%, then sells it at 10% off the marked price. What is the final price?
9. Find the area of a circle with radius 7 cm, to the nearest tenth.
10. A tool rents for $18 plus $6.50 per hour. The bill is $57. For how many hours was it rented?
11. Find the median and the mean of 78, 85, 92, 85, 70.
12. In how many ways can first, second, and third place be awarded among 5 runners?
13. Solve 4(x − 1) = 2x + 10.
14. Solve 7 − 3x ≤ 19.
15. Solve the system x + 2y = 12 and 3x − y = 1.
16. Solve x2 − x − 12 = 0.
17. Write the equation of the line through (−2, 5) and (4, −1).
18. For f(x) = 2x2 − 3, find f(−2).
19. Function A is y = 3x + 1. Function B’s table shows (0, 2), (1, 6), (2, 10). Which has the greater rate of change?
20. A rectangle’s length is 4 more than its width, and its area is 45. Write a quadratic equation and find the width.
Answer Key
1. 9/12 + 8/12 = 17/12 = 1 5/12. (Adding tops and bottoms, 5/7, is the classic trap.) (Ch 11)
2. 3(4) − 5 = 7. (If you got −17, you squared −2 as −4.) (Ch 27)
3. 8x − 6 − x − 5 = 7x − 11. (Subtract every term inside the second parentheses.) (Ch 28)
4. −8 + 7 = −1. (Ch 12)
5. A. The denominator is 0. (Ch 5)
6. 6.40 ÷ 2.5 = $2.56 per pound. (Ch 13)
7. 1,200 × 0.035 × 2 = $84. (Ch 15)
8. 15 × 1.40 = $21.00; 21 × 0.90 = $18.90. (Not $19.50: the two percents do not combine into +30%.) (Ch 14)
9. 49π ≈ 153.9 cm2. (Ch 20)
10. 18 + 6.5h = 57, so h = 6 hours. (Ch 32)
11. Median 85; mean 410 ÷ 5 = 82. (Ch 24)
12. 5 × 4 × 3 = 60. (Ch 26)
13. 4x − 4 = 2x + 10, so x = 7. (Ch 31)
14. −3x ≤ 12, so x ≥ −4 (flip when dividing by −3). (Ch 34)
15. y = 3x − 1; x + 2(3x − 1) = 12, so x = 2 and y = 5. (Ch 33)
16. (x − 4)(x + 3) = 0, so x = 4 or −3. (Ch 35)
17. Slope = −6 ÷ 6 = −1; y = −x + 3. (Ch 40)
18. 2(4) − 3 = 5. (Ch 42)
19. Function B (4 per step versus 3). (Ch 43)
20. w(w + 4) = 45, so w2 + 4w − 45 = 0 and (w + 9)(w − 5) = 0; w = 5 (−9 is not a length). (Ch 35)
Count: quantitative items 1, 4, 5, 6, 7, 8, 9, 11, 12 (9 of 20, 45%); algebraic items 2, 3, 10, 13–20 (11 of 20, 55%).
Missed one? Go back to the chapter named after that answer, redo its Your Turn practice, then try the item again.
Ready line: This check has 20 questions. Aim for 16 or more right (80% or more), each one on your first try, without help. Under 16? That’s useful information, not failure: go back to the chapters named in the answers you missed, redo them, then try those questions again. 16 or more? You can move on. This 80% line is our study goal, not the official passing score for the GED® test, and reaching it doesn’t guarantee you’ll pass the GED® test. It means you’re ready for the next step.
Mathematics Reference
This section summarizes relationships taught in the lessons. It is an instructional reference, not a reproduction of the official formula sheet for the GED® test. On test day the sheet writes some of these a little different, like ½bh instead of bh/2. Same formula, different clothes. Define the letters, match units, check restrictions, and select a formula that describes the actual figure or relationship before substituting. The reference saves you a lookup; it doesn’t decide what the hell the question means. Keep the same reasoning on duty here that you used in the chapters.
Arithmetic and numerical forms
| Relationship | Meaning or restriction |
|---|---|
| a/b = a ÷ b | b must not equal zero |
| a − b = a + (−b) | Subtract by adding the opposite |
| Distance = |a − b| | Nonnegative separation on a number line |
| aman = am+n | Matching base; use values where expressions are defined |
| am/an = am−n | a ≠ 0 |
| (am)n = amn | For integer exponents, use values where expressions are defined. With rational exponents, the positive-real-base case is safe; negative bases require separate domain checking. |
| a−n = 1/an | a ≠ 0 |
| Scientific notation: a × 10n | 1 ≤ |a| < 10; integer n |
| a^(m/n) = (n√a)m | Rational exponent; a > 0 and n is a positive integer |
Rates, percentages, and conversions
| Relationship | Use |
|---|---|
| Unit rate = quantity ÷ corresponding units | Retain units in numerator and denominator |
| Total cost = units × price per unit | Price per unit is the unit rate |
| Part = decimal rate × whole | Percent divided by 100 gives decimal rate |
| Percent change = change ÷ original × 100% | Use original amount as base |
| New amount = original × (1 ± r) | Plus for increase, minus for decrease |
| I = Prt; total = P + I | Simple interest, annual decimal rate and time in years |
| Distance = rate × time | Use compatible time units |
| 1 ft = 12 in; 1 yd = 3 ft; 1 mi = 5,280 ft | Standard length conversions |
| 1 km = 1,000 m; 1 m = 100 cm | Metric length conversions |
| 1 hr = 60 min; 1 min = 60 s | Time conversions |
| Length factor k; area factor k2; volume factor k3 | Use corresponding lengths in the same unit |
Flat figures
| Figure or quantity | Relationship |
|---|---|
| Rectangle | A = lw; P = 2l + 2w |
| Square | A = s2; P = 4s |
| Triangle | A = bh/2; P = sum of three sides |
| Parallelogram | A = bh |
| Trapezoid | A = h(b1 + b2)/2 |
| Circle | A = πr2; C = 2πr = πd; d = 2r |
| Pi | π ≈ 3.14 |
| Right triangle | a2 + b2 = c2; c is hypotenuse |
For all area formulas, h is perpendicular to the selected base. Polygon perimeter is the sum of the exterior side lengths. Composite areas add nonoverlapping parts or subtract removed parts. Composite perimeter follows only the outside boundary. The internal lines help organize the work; they don’t get to sneak into the damn perimeter and charge you for edges that aren’t outside.
Solids
| Solid | Volume | Closed surface area |
|---|---|---|
| Rectangular prism | lwh | 2lw + 2lh + 2wh |
| Right prism | Bh | ph + 2B |
| Cylinder | πr2h | 2πrh + 2πr2 |
| Regular right pyramid | Bh/3 | B + ps/2 |
| Right circular cone | πr2h/3 | πr2 + πrs |
| Sphere | 4πr3/3 | 4πr2 |
B is base area; p is base perimeter; h is perpendicular height; s is slant height. These are distinct quantities. Remove absent or hidden surfaces. In a right cone, s2 = r2 + h2. Use the relevant supplied formulas for other solids or unusual shapes. Each letter has its own damn job. Don’t swap perpendicular height with slant height or count a hidden face because a familiar formula made it convenient.
Lines, equations, and quadratics
| Formula | Meaning or restriction |
|---|---|
| m = (y2 − y1)/(x2 − x1) | Slope between two points; x2 ≠ x1 |
| y = mx + b | Slope-intercept form: slope m, y-intercept b |
| y − y1 = m(x − x1) | Point-slope form: slope m through the point (x1, y1) |
| ax2 + bx + c = 0 | Standard form of a quadratic equation; a ≠ 0 |
| x = [−b ± √(b2 − 4ac)]/(2a) | Quadratic formula for ax2 + bx + c = 0, a ≠ 0 |
| Vertex input x = −b/(2a) | x-value of the vertex of y = ax2 + bx + c; a ≠ 0 |
Solve the quadratic only over the real-number domain when requested. A negative discriminant means no real roots. Parallel nonvertical distinct lines share slope; nonhorizontal perpendicular slopes have product −1. Horizontal and vertical lines form the special perpendicular pair. A function assigns exactly one output to every allowed input.
Data, chance, and counting
| Formula | Meaning or restriction |
|---|---|
| Mean = (sum of values)/(number of values) | Ordinary average |
| Weighted mean = [sum of (weight × value)]/(sum of weights) | Each value counts according to its weight |
| nPr = n!/(n − r)! | Permutations: ordered arrangements of r items chosen from n |
| nCr = n!/[r!(n − r)!] | Combinations: selections of r items from n when order does not matter |
| P(E) = (favorable outcomes)/(all outcomes) | Probability of event E when all outcomes are equally likely |
Sort values for median. With an even count, average the two middle values. Mode is a most frequent value; range = maximum − minimum. For a missing value, multiply mean by count and subtract the known total. For independent events multiply probabilities; for a dependent sequence multiply conditional probabilities. For alternatives, subtract any overlap. P(not E) = 1 − P(E).
A repeatable reasoning check
Name the requested quantity and unit. Identify given facts and missing information. Draw or write a model. Select a method that matches the relationship. Carry out each step without changing the model. Check arithmetic, domain, units, magnitude, and the original question. Explain any assumptions or exclusions. If a conclusion fails, find the earliest unsupported step and repair it.
Mathematics Glossary
Absolute value. a number’s distance from zero, written between vertical bars.
Additive inverse. the opposite that combines with a number to make zero.
Annual rate. rate for one year.
Approximation. a value close to the exact one.
Area. amount of flat surface in square units.
Assumption. a condition taken as true without being established by the supplied facts.
Axis of symmetry. a line that divides a figure into mirror-image halves; for a quadratic graph y = ax2 + bx + c, it is the vertical line through the vertex.
Base. (1) the number being repeatedly multiplied; (2) in percent, the whole amount the percent is taken of; (3) in geometry, the side or face a height is measured from.
Base area B. area of one base.
Base perimeter p. boundary length of that base.
Benchmark. a familiar reference such as 0, 1/2, or 1.
Binomial. a polynomial with two terms.
Boundary point. the value separating acceptable from unacceptable values.
Box plot. display of median, quartiles, and spread.
Break-even. the condition in which modeled revenue and cost are equal; see Break-even point.
Break-even point. the input or location where two modeled amounts are equal.
Categorical data. labels or groups.
Circumference. distance around a circle.
Closed circle. included endpoint.
Coefficient. a factor multiplying a variable.
Combination. a selection where order does not matter.
Commission. pay based on a stated share of sales.
Common denominator. a shared unit for fractions being added or subtracted.
Common factor. a factor shared by every term.
Complement. an event’s opposite.
Complementary angles. angles totaling 90 degrees.
Complete the square. rewrite part of an equation as a squared binomial.
Complex fraction. a fraction containing another fraction in its numerator or denominator.
Composite. a whole number greater than 1 with more than two positive factors.
Composite figure. a figure made from simpler figures.
Cone. a solid tapering from a circular base to an apex.
Constant. a fixed value.
Constant of proportionality. the fixed multiplier in y = kx.
Constraint. a condition that a solution must satisfy.
Contradiction. a false statement showing no solution.
Conversion factor. a ratio of equal measurements in different units.
Coordinate distance. separation computed using horizontal and vertical changes.
Coordinate plane. two perpendicular number lines used to locate points.
Counterexample. one case showing a general claim is false.
Cube. (1) third power; (2) a box with six equal square faces.
Cube root. the number whose cube gives the original value.
Cylinder. a solid with circular parallel congruent bases.
Decimal alignment. matching place values for addition and subtraction.
Decimal point. the mark separating whole units from parts of a unit.
Decreasing. output falls as input rises.
Degree. (1) unit for measuring angles, written °; (2) the highest exponent in a polynomial.
Denominator. the bottom number naming the division.
Diameter. distance through the center across the circle, twice the radius.
Difference. the result of subtraction.
Digit. one of the symbols 0 through 9.
Dimension. an independent direction of measurement.
Discriminant. b2 − 4ac, determining the number of real roots.
Display. the expression or result shown.
Distance. nonnegative separation between locations.
Domain. allowed inputs.
Domain restriction. an excluded input, often from a zero denominator.
Dot plot. individual values marked above a number line.
Elimination. adding equivalent equations to remove a variable.
End behavior. how output behaves for large positive or negative inputs.
Entry. the expression typed into the device.
Equation. a statement that two expressions are equal.
Equivalent. different forms with the same value.
Equivalent expressions. expressions with equal values for every allowed input.
Error analysis. finding where reasoning or calculation went wrong.
Estimate. an approximate result.
Evaluate. find the value for specified inputs.
Event. a specified set of outcomes.
Exact. without approximation.
Exact form. an unrounded value such as 3/8 or √5.
Excluded value. an input making an original denominator zero or a divisor expression zero.
Expand. distribute multiplication across grouped terms.
Expanded form. a number written as the sum of its place values.
Exponent. a small raised number indicating repeated multiplication.
Expression. numbers, operation signs, and sometimes variables naming an amount.
Exterior boundary. the outside edge.
Factor. a number or expression multiplied by another to form a product.
Factorial. n! = n(n − 1)…1, with 0! = 1.
Feasible solution. one meeting both the mathematics and the context.
Formula. an equation expressing a general relationship.
Fraction. a number expressing division of a numerator by a nonzero denominator.
Function. a rule assigning exactly one output to each input in its domain.
Function notation. f(x), the output of function f at input x.
GCF. greatest common factor.
Gratuity. a tip calculated from a stated base.
Gross pay. earnings before deductions.
Histogram. frequencies in numerical intervals.
Hypotenuse. the side opposite the right angle and the longest side of a right triangle.
Identity. an equation true for all allowed inputs.
Improper fraction. Commonly, a fraction whose numerator’s magnitude is greater than or equal to the denominator’s magnitude, so its magnitude is at least 1; examples include 7/4, 5/5, and −7/4. Terminology varies, and some references apply the term only to nonnegative fractions.
Inclusive inequality. ≤ or ≥, including equality.
Increasing. output rises as input rises over an interval.
Independent events. events for which one does not change the probability of the other.
Inequality. a comparison using symbols such as <, >, ≤, or ≥.
Initial value. the modeled output at input zero, when meaningful.
Input. the value supplied to a rule.
Integer. a whole number, its negative, or zero.
Intercept. where a graph meets an axis.
Intersection. a point shared by graphs.
Interval. a connected range of inputs.
Inverse operation. singular form of inverse operations; see Inverse operations.
Inverse operations. operations that undo each other, such as addition and subtraction.
Isolate. use equivalent operations to leave a variable alone.
LCM. least common multiple.
Least common denominator. a common denominator containing every required factor.
Legs. the two sides forming the right angle.
Like terms. terms with the same variable part and exponents.
Linear expression. an expression whose variable terms have first power only.
Linear function. a function with constant rate of change, graphed as a nonvertical line.
Magnitude. size without direction.
Markup. an increase above a stated cost.
Mean. total divided by count.
Median. middle ordered value.
Mental calculation. arithmetic using number relationships without a device.
Midpoint. the coordinate halfway between two endpoints.
Mixed number. a whole number plus a proper fraction.
Mode. most frequent value.
Model. a mathematical representation of a relationship with stated assumptions.
Model assumption. a condition treated as true for the calculation.
Multiple. a result of multiplying a number by a whole number.
Multiplier. a factor representing the resulting amount after a change.
Multivariable equation. an equation connecting more than one variable.
Negative. less than zero.
Negative exponent. an exponent indicating a reciprocal.
Negative factor. a factor below zero.
Negative reciprocal. the value −1/m for nonzero m.
Nonlinear. not following one constant rate of change.
Number line. a line with numbers placed in order at equal spacing.
Numerator. the top number of a fraction.
Open circle. excluded endpoint.
Opposites. numbers equally far from zero on opposite sides.
Optimization. finding a greatest or least value under constraints.
Order of magnitude. a scale described by a power of ten.
Ordered pair. (x,y), horizontal coordinate first.
Origin. the intersection of the coordinate axes, (0, 0).
Output. the resulting value.
Parabola. the graph of a quadratic function.
Parallel. see Parallel lines.
Parallel lines. distinct coplanar lines that do not intersect.
Parentheses. marks grouping parts to treat together.
Percent. per hundred.
Percent change. change divided by the original amount, times 100%.
Percentage point. a difference between two percentages.
Perimeter. total distance around a polygon.
Period. the input distance after which an entire pattern repeats.
Permutation. an ordered selection.
Perpendicular. see Perpendicular lines.
Perpendicular height h. the direct distance from apex to the base plane.
Perpendicular lines. lines meeting at right angles.
Pi. the constant π relating circumference to diameter.
Piecewise rule. different rules applied over specified input intervals.
Place value. the amount a digit represents because of its position.
Point-slope form. y − y1 = m(x − x1).
Polygon. a closed flat figure made of line segments.
Polynomial. a sum of terms with nonnegative whole-number variable exponents.
Polynomial division. finding a quotient whose product with the divisor reconstructs the dividend, with any remainder accounted for.
Positive. greater than zero.
Precision. the detail of a measurement or reported value.
Prime. a whole number greater than 1 with exactly two positive factors.
Principal. the starting amount earning or owing interest.
Principal square root. the nonnegative square root shown by √.
Prism. a solid with parallel congruent bases connected by side faces.
Product. the result of multiplication.
Proportion. an equation stating that two ratios are equal.
Proportional. of form y = kx.
Proportional graph. a straight line through the origin.
Pyramid. a solid with a polygon base and triangular faces meeting at an apex.
Pythagorean theorem. a2 + b2 = c2 for a right triangle.
Quadrant. one of four regions formed by the axes.
Quadratic equation. an equation reducible to ax2 + bx + c = 0 with a ≠ 0.
Quotient. the result of division.
Radius. center-to-circle distance.
Range. (1) the outputs a function actually produces; (2) for data, the maximum minus the minimum.
Rate. a ratio of quantities with different units.
Rate of change. output change per input unit.
Ratio. a comparison by division.
Rational exponent. a fractional exponent representing a root and a power.
Rational expression. a quotient of polynomials.
Rational number. a number expressible as an integer divided by a nonzero integer.
Reciprocal. the nonzero fraction obtained by exchanging numerator and denominator.
Reference point. the location or amount used as zero.
Reference sheet. a supplied guide to formulas or calculator use.
Relative maximum or minimum. an output at least as high or low as nearby outputs.
Relevant information. data needed for the question.
Remainder. the amount left after forming equal whole groups.
Repeating decimal. a decimal with a digit pattern continuing forever.
Representation. a table, equation, graph, or verbal description of the same relationship.
Restriction. a value that is excluded or a condition that must hold.
Revenue. incoming sales amount before costs are subtracted.
Right triangle. a triangle with one 90-degree angle.
Rise. vertical change.
Root or zero. an input giving output zero.
Round. replace a number with a nearby value at a chosen place.
Run. horizontal change.
Sample space. all possible outcomes in a model.
Scale. a stated relationship between drawing distance and actual distance.
Scale factor. the multiplier from one corresponding length to another.
Scaling. multiplying every amount by a common factor.
Scatter plot. paired numerical values on coordinate axes.
Scientific calculator. a calculator supporting powers, roots, fractions, and other mathematical functions.
Scientific notation. a number a × 10n with 1 ≤ |a| < 10.
Signed number. a number shown with its positive or negative direction.
Similar figures. figures with equal corresponding angles and proportional corresponding lengths.
Simple interest. interest calculated only on principal.
Simplify. rewrite in an equivalent form with common factors removed.
Simultaneous solution. values making all equations true.
Slant height s. the face or side-surface distance from base edge to apex.
Slope. vertical change divided by horizontal change, m = (y2 − y1)/(x2 − x1).
Slope-intercept form. y = mx + b.
Solution. an input making an equation true.
Solution pathway. a planned sequence connecting given information to the required answer.
Solution set. all values satisfying a statement.
Sphere. a solid whose surface points are equally distant from its center.
Square. (1) second power; (2) a rectangle with four equal sides.
Square root. a number whose square gives the original value.
Standard form. (1) a line written Ax + By = C; (2) a quadratic written ax² + bx + c = 0 (the test sheet writes y = ax² + bx + c).
Strict inequality. < or >, excluding equality.
Substitute. replace a variable by a given number.
Substitution method. replacing one variable with an equivalent expression.
Subtraction. adding the opposite of the number being removed.
Sufficient information. enough facts to determine the requested result.
Sum. the result of addition.
Supplementary angles. angles totaling 180 degrees.
Surface area. total area of exposed faces, measured in square units.
Symmetry. a transformation leaving a graph unchanged.
System. equations considered together.
Technology-enhanced item. a question answered through an onscreen interaction.
Term. a part separated at the top level by addition or subtraction.
Terminating decimal. a decimal that ends.
Undefined. not assigned a value under the stated arithmetic rules.
Unit rate. an amount per one unit.
Variable. a symbol representing a number.
Verification. checking a claim against appropriate evidence.
Vertex. the turning point of a parabola, where its output reaches a minimum or maximum.
Vertical-line test. checking whether any vertical line meets a graph more than once.
Volume. space within a solid, measured in cubic units.
Weight. the influence assigned to a value in an average.
Zero-product property. if a product is zero, at least one factor is zero.
GED® Mathematical Reasoning Preparation
The official subject overview describes quantitative and algebraic work through basic mathematics, geometry, algebra, graphs, and functions. Treat the lesson alignment lines as pointers to skills, not promises that a particular question will appear. The official assessment guide explains content indicators and five mathematical practices: building solution pathways, abstracting problems, furthering reasoning, mathematical fluency, and evaluating reasoning. Practice selecting and defending methods alongside calculating answers.
Readiness grows through new mixed problems, explanations, and delayed review. Work sometimes without a calculator and sometimes with permitted tools. Read axis scales, formula definitions, units, rounding instructions, and the requested response format. The official test includes multiple-choice and other interactive formats. Use the official tutorials, if your education department provides them, to learn the interface; the mathematics in this book remains teachable on paper.
For an actual exam, obtain current authorized information about eligibility, scheduling, identification, accommodations, test-center or online procedures, allowed materials, and calculator access. Rules can differ by delivery setting and may change. A sample question or an old printed reference is not the final authority for your appointment. HAB JUSTICE does not award the GED® credential and does not claim GED Testing Service approval.
Calculator and Calculator Free Reasoning
Without a calculator, favor exact fractions, familiar percent benchmarks, compatible factors, distribution, and inverse checks. Write enough steps to protect signs and grouping. To compare 7/8 and 0.9, use hundredths or a common denominator: 7/8 = 0.875 < 0.900. To find 15% of 80, use 10% plus 5%: 8 + 4 = 12. These are justified rewrites, not guesses.
With a permitted calculator, first write the expression you intend to evaluate. Group a compound numerator and denominator separately. Replace negative inputs with parenthesized values. Identify radius versus diameter before using a circle or cylinder formula. Estimate the result, inspect the displayed entry, retain intermediate precision, and round only as directed. A calculator is a faithful employee with no judgment; give it a bullshit instruction and it will deliver the bullshit efficiently.
The official materials identify the TI-30XS MultiView and an onscreen calculator for the calculator-permitted portion. Access depends on the testing setting. Use the current official calculator reference and tutorial for operating details and the current testing instructions for what you may bring or use. Do not assume a personal device or a familiar different model is permitted.
Using the Formula Reference
Choose the requested measure before selecting a formula. Define each variable with its unit, reconcile units, substitute with grouping, solve for the unknown, and check by substitution. In solid geometry, B is base area, p is base perimeter, h is perpendicular height, and s is slant height when the formula uses it. A formula for a closed solid includes every outside face; an open or composite object may require removing missing or joined faces.
The reference pages are study guidance, not a reproduction of every official formula-sheet version. Use the formula sheet supplied for the actual test. Know why a relationship fits so that a supplied formula becomes useful instead of becoming another line of symbols staring back at you.
Completion and Continuing Study
You have reached the end of sixteen units and forty-seven chapters. That is substantial study. Keep the distinction clear: reading completion records what you studied, independent work shows what you can presently do, and the authorized testing process determines your official result on the GED® test. No page in this book establishes accreditation, employment, release, parole eligibility, or a guaranteed score.
Choose a chapter to review on your own and name your next task. Write down the chapter number, the first step you were unsure of, the method you will review, and a different problem you will solve next. Later, attempt another problem without its solution visible. Mix old topics back into current work so the skill survives a change in context.
One Last Damn Thing
You do not have to love mathematics. You do not have to become the person who wakes up delighted by a denominator. You do need a way to slow a problem down, identify what is known, choose a relationship, and make each step answer for itself. You have spent this book practicing exactly that.
When the next problem gets ugly, do not hand it your whole history and let it pretend to judge you. Hand it a pencil mark. Define the variable. Draw the figure. Name the unit. Find the first step you can justify. If the answer is bullshit, check it, repair it, and try again. An error is information about a step. It is not your name.
The numbers do not get to tell you who you are. They do have to obey the relationships. Make them prove every damn line.
We do not hurt. We do not judge. We help.
Sources and Standards References
GED Testing Service. Assessment Guide for Educators, October 2020 edition. The Mathematical Reasoning chapter (pp. 20–29) and Appendix C give the official indicators and Mathematical Practices quoted in this part. Official guide: https://www.ged.com/content/dam/websites/ged/resources/assessment-guide-for-educators-all-subjects.pdf
GED. Mathematical Reasoning. Official subject information and sample formats: https://www.ged.com/about-test/test-subjects/math.html
GED. Test Subjects. Official overview of formats and calculator access: https://www.ged.com/about-test/test-subjects.html
GED Testing Service. 2014 GED Test Technical Manual (2022 edition), p. 12: test length, the two parts, and calculator use; the 145 passing standard (p. 14). https://www.ged.com/content/dam/websites/ged/resources/2014-GED-Test-Technical-Manual-2022-V2022.01-SECURED2.pdf
GED. Free Classroom Materials. Official study materials, formula-sheet and calculator resources: https://www.ged.com/educators-admins/teaching/classroom-materials.html
GED Testing Service. GED Policy Manual (March 2025): https://www.ged.com/content/dam/websites/ged/resources/GED-Policy-Manual-2025.pdf
GED Testing Service. ged.com, Testing in Corrections: https://www.ged.com/educators-admins/test-admin/corrections.html
Official guide and subject information consulted October 29, 2026. Follow current authorized testing information for an actual appointment. Links provide optional further resources; an internet connection is not required to study this book.
GED® is a registered trademark of the American Council on Education (ACE) and may not be used without permission. The GED® and GED Testing Service® brands are administered exclusively by GED Testing Service LLC under license. HAB JUSTICE is an independent companion curriculum and is not authorized, endorsed, or licensed by the American Council on Education or GED Testing Service. HAB JUSTICE does not claim accreditation or award a GED® credential.